Various people have numerous reasons why they convert their natural gas grill to a propane gas grilling. This is because liquid propane gas grill can produce more heat and energy to cook the food faster. Propane gas propane gas grills are also lightweight because you can disconnect the propane tank and take the grill wherever you want. Converting a natural gas grill to a propane gas grill is a difficult challenge in fact it is not for newbies. Remember that your car or truck this, you will lose the warrantee provided on your grill. the unlimited guide
In the event that you want to know how to convert a natural gas grill to a propane grill, then here would be the things that you will be seeking:
1 ) wrenches
2. OPD connection
3. hosing equipment in order to connect the regulators
4. propane regulator
5. conversion package
And here are instructions:
1 ) Check whether the machine of your grill offers a conversion kit for converting to propane as your supply of fuel. Many companies do not provide this conversion kit, but it will not damage in an attempt to inquire them.
2. Take away the gas line from your grill.
3. The burners have orifice furnishing, take them off. These types of sorts of fittings are the fittings that you can view at the end of the valves. They have a little hole drilled in the center. Gas gas grills need bigger orifices since they provide more heat and energy when burning compared to natural gas.
4. Substitute the orifice fittings with adjustable orifices. Before you choose replacement orifices, you should use a BTU and an orifice sizing guide.
5. Eliminate the grill’s hosing from the valve system.
6. Eliminate the grill’s gas regulator. Swap it with the propane regulator bundled with the conversion kit or the one which your purchased. You can buy propane limiter from your local liquid propane dealer.
7. Change the hosing with a brand new propane specific to the valve.
8. Mount the ODP connector. To avoid unwanted fires, the overfill protection device shields an accidental overfill of the connector.
9. Try to make sure that all links are tight. Spray drinking water and soap on the connections and check if there are bubbles or hissing. If you found any leak, you should tighten that connection.